PSMART intelligent ZigBee socket with measurement, USB port and USB Type C RM series - version without frame
To charge your phone or other device, you o longer eed a charger, just a USB cable is enough!
The device is compatible with Home Assistant ZigBee2mqtt! Below are screenshots from the HA application.
RM series devices can be connected to each other in frames (available in our offer). Use the RM series in your home - thanks to this you will combine an elegant appearance with intelligent control!
ATTENTION! The offer includes a socket module without a frame. Choose the appropriate single or modular frame from the PSMART offer. Product photos are illustrative, with an example of a single frame.
Main advantages:
Control the operation of devices from anywhere in the world
The device is compatible with Home Assistant ZigBee2mqtt!
The socket has a precise current measurement. Checking the current consumption: Power W, Voltage V, Total KWh
Fast charging with 3.0+/3.0/2.0 protocol and USB/type C interface with support for various phones and electrical devices, with maximum DC output power of 20 W
History of current measurement available on the chart (daily, monthly and annual)
The device has a pin (grounding)
The socket has status control after a power failure: on, off, restore the state before the power loss
Manual button control
Possibility of automation based on many parameters
Possibility to set a schedule and schedule
Free Tuya Smart or Smartlife application for Android and iOS
easy to install and use
Voice control via Amazon Alexa or Google Assistant, only for devices compatible with these systems
Note: Two charging ports will work continuously when the socket is turned off.
For proper operation, an additional ZigBee gateway is required, available in our offer.
Built-in 2 USB ports
Protocol 3.0+/3.0/2.0 and USB interface /type C with support for various phones and electrical devices, with a maximum output power of DC 20W Modular socket
Surprise everyone with the ew ZigBee sockets that are advanced and designer. A seemingly ordinary socket, but inside there is the latest ZigBee module with the ability to program advanced scenes and automation. The socket fits perfectly into rooms with closely located (adjacent, modular) flush-mounted boxes. Look for other devices from this series in our offer and connect them using dedicated frames, which can also be found in our offer. Precise measurement of energy consumption!
Momentary indication
Total daily consumption
Weekly total
Monthly summary
Energy consumption chart
PSMART intelligent socket
The intelligent flush-mounted socket from the RM series allows for remote control of devices connected to a given socket, setting timer, or energy consumption monitoring. It works with Alexa and Google voice assistants and has a umber of security features. The socket fits perfectly into rooms with closely located (adjacent, modular) flush-mounted boxes. Look for other devices from this series in our offer and connect them using dedicated frames, which can also be found in our offer. *Depending on delivery, the product may differ slightly from the photos presented in the offer. Smart timer
The socket also allows you to set a schedule via the app, which means you can decide the times at which devices in your home should be turned on or left off. This is a great way to save electricity, because thanks to this function you can avoid unnecessary energy consumption. Remote control
If you forgot to turn off the light when leaving the house, or on the contrary, you would like to leave it on for your pet or scare away potential evil boat, you can do it remotely using the app. This is invaluable convenience and comfort that every user will appreciate. Safe use The socket has a umber of protections against surges and overcurrents, as well as against overheating, so you don't have to worry about the devices connected to the socket. Below are screenshots from the Home Assistant ZigBee2MQTT application!
Basics of the ZigBee protocol: The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings ... ZigBee is a MESH connection, which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If the remote sensor has o connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection
Devices using the ZigBee protocol in the event of a change state, they connect to the control panel in 0.2 seconds, and WiFi eed about 5 seconds to connect to the etwork after the state change. ZigBee devices have a huge advantage when it comes to automating smart rules
On a WiFi etwork, with 25 devices, you will start to experience etwork problems. You can easily add over 50 devices to the ZigBee switchboard
The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months.
ZigBee communication uses very little energy, which gives a long battery life.
Specification: Power supply: AC 100V-240 V (50/60 Hz)
Maximum continuous power: 3000 W
Maximum peak power: 3600
Connectivity: ZigBee 3.0
Wireless standard: IEEE 802.15.4
Dimensions without frame: 50 x 50 x 42.2 mm
Socket dimensions in the frame: 80 x 80 mm
USB charging power: up to 20 W
USB-A: DC 5 V/3 A, 9 V/2 A, 12 V/1.5 A
TYPE-C: DC 5V/3A, 9V/2.22A, 12V/1.67 A
USB-A + TYPE-C: DC 5V/3.4A max.
Dimensions without frame: 50 x 50 x 42.2 mm
Dimensions of the socket in the frame: 80 x 80 mm
Included in the set: PSMART USB measurement socket, black RM ZigBee TUYA
Mounting screws
Instruction
Product code: T450U The offer also includes models with 1, 2 and 3 channel modules white and black RM series lighting, and dedicated 1, 2, 3 and 4 module frames!
Get any combination horizontally or vertically.
The modular design allows you to configure switches switches in 2, 3 and 4 module frames.
To purchase a product in our online store, select the product you like and add it to your shopping cart. Next, go to the Cart and click on "Checkout" or "Quick order".
When placing a quick order, write your full name, phone number and e-mail. The manager will call you back and clarify the conditions of the order. Based on the results of the conversation, you will receive a confirmation of the registration of the goods by mail or via SMS. Now it remains only to wait for delivery and enjoy the new purchase.
Placing an order in the standard mode is as follows. Completely fill out the form in successive stages: address, delivery method, payment, information about yourself. We advise you to write in the comments to the order information that will help the courier find you. Click the "Checkout" button.
Pay for purchases in a convenient way. There are 3 payment options available in the online store:
- Cash on pickup or delivery by courier. The specialist will contact you on the day of delivery to clarify the time and prepare the change from any banknote in advance. You sign shipping documents, deposit funds, receive goods and a check.
- Cashless payment for self-delivery or registration in the online store: Visa and MasterCard cards. To pay for the purchase, the system will redirect you to the server of the ASSIST system. Here you need to enter the card number, expiration date and the name of the holder.
- Electronic systems for online ordering: PayPal, WebMoney and Yandex.Money. To make a purchase, the system will redirect you to the payment service page. Here you need to fill out the form according to the instructions.
Save time on ordering. There are 4 delivery options available in the online store:
- Courier delivery works from 9.00 to 19.00. When the goods arrive at the warehouse, the courier service will contact you to clarify the details. The specialist will offer to choose a convenient delivery time and specify the address. Inspect the packaging for integrity and compliance with the specified configuration.
- Pickup from the store. A list of outlets to choose from will appear in the shopping cart. When the order arrives at the warehouse, you will receive a notification. To receive an order, contact the employee in the checkout area and give the number.
- Postamat. When the order arrives at the outlet, a unique code will be sent to your phone or e-mail. The order must be paid at the parcel terminal. Shelf life - 3 days.
- Postal delivery via Russian Post. When the order arrives at the branch, a notice of the parcel will be sent to your address. Before paying, you can evaluate the condition of the box: weight, integrity. You can open the box yourself only after paying for the order. One order can contain no more than 10 items and its value should not exceed 100,000 rubles.
An additional tab to place information about the store, delivery, or any other important content. It will help you answer the buyer's questions and dispel his doubts about the purchase. Use it at your discretion.
You can remove it or bring it back by changing one checkbox in the component's settings. Very comfortably.