Fast View
Enough
Art.: RPS17490
DS-PK1-E-WE wireless manipulator is intended for work with HIKVISION AX PRO alarm systems operating in the 868MHz band The wireless connection and battery-powered option allow the device to be installed in places where wiring may be difficult
Fast View
Not enough
Art.: RPS12598
The digital temperature sensor DS-T1 is intended for cooperation with alarm centers and communication modules of the SATEL brand
Fast View
Enough
Art.: RPS6010
Fast View
Enough
Art.: RPS1677
Fast View
Enough
Art.: RHM059
Fast View
Enough
Art.: RPS6707
Fast View
Enough
Art.: RPS15403
The digital temperature sensor DS-T2 is designed to work with SATEL brand devices that have a 1-wire bus (eg GPRS-A module).
The device can work both indoors and outdoors. The sensor is designed for flush mounting
The device complies with the IP65 sealing class
The device can work both indoors and outdoors. The sensor is designed for flush mounting
The device complies with the IP65 sealing class
Fast View
Much
Art.: LS12891
Fast View
Enough
Art.: LS8966
Fast View
Much
Art.: RPI18705
Fast View
Enough
Art.: RPI26232
Fast View
Enough
Art.: PSD16525
The ball handle BRACKET-E-5 is an element of the BRACKET-E modular handle for movement sensors The product provides the option of mounting sensors from the OPAL, OPAL Plus, OPAL Pro, AOD-210 series
Fast View
Much
Art.: LS11827
Fast View
Much
Art.: RPI30438
Fast View
Enough
Art.: RPS15131
The device is designed to work with the operation of a two-way ABAX/ABAX2 wireless system
The VERSA-KWRL2 keypad is designed for servicing and programming VERSA series alarm control panels Thanks to the LCD display, which shows text messages, even the most advanced functions of the alarm control panel are easy and convenient to use
The built-in remote card counter allows you to service the system without having to remember the password
The manipulator is powered by a battery (included in the set) and communicates with the alarm center using a special radio transmission (two-way communication) protocol.
The VERSA-KWRL2 keypad is designed for servicing and programming VERSA series alarm control panels Thanks to the LCD display, which shows text messages, even the most advanced functions of the alarm control panel are easy and convenient to use
The built-in remote card counter allows you to service the system without having to remember the password
The manipulator is powered by a battery (included in the set) and communicates with the alarm center using a special radio transmission (two-way communication) protocol.
Fast View
Enough
Art.: PSD6494
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
A flashing LED indicates that the microphone has captured the impact sound wave Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
A flashing LED indicates that the microphone has captured the impact sound wave Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Fast View
Much
Art.: LS12359
Fast View
Enough
Art.: PSD18958
The wireless expander ARM310-W2(868) allows you to connect a wired detector, such as a PIR, to a DAHUA brand alarm system Alarm type and zone parameters can be easily set by installers using the app
The expander can be used with alarm devices operating in NO and NC modes
The expander can be used with alarm devices operating in NO and NC modes
Fast View
Fast View
Much
Art.: HK1385