Sensors & Security

ACMD-200 wireless carbon monoxide sensor that detects the dangerous concentration of this gas in the monitored room The digital temperature compensation mechanism allows working in a wide temperature range The ACMD-200 can operate automatically or as a two-way ABAX2 wireless system
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor

The digital temperature sensor DS-T2 is designed to work with SATEL brand devices that have a 1-wire bus (eg GPRS-A module).
The device can work both indoors and outdoors. The sensor is designed for flush mounting
The device complies with the IP65 sealing class

The module allows you to connect wired devices to the wireless ABAX/ABAX2 system

A wireless smoke sensor whose task is to quickly detect an emerging fire In addition to transmitting information about danger to the control panel, the detector HY-SA21A-W2(868) can report about danger with the help of an integrated sound alarm
HY-SA21A-W2(868) works with other devices compatible with DAHUA wireless system

The external, controllable wireless optical-acoustic alarm is intended for use in burglary or attack signaling Two-way wireless communication at 868 MHz is based on AES-128 encryption Danger is signaled in two ways: optical with a stroboscopic light and acoustically modulated with a loud sound signal (piezoelectric transducer 110 dB)
The device is powered by batteries (4 x CR123A) or voltage 12V DC
The external body of the alarm is made of impact-resistant polycarbonate, which makes it highly mechanical resistant and guarantees an aesthetic appearance even after many years of operation. The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)

Expander DS-PM1-I1-WE provides the possibility of connecting a wireless sensor to a wireless HIKVISION AX PRO system The device can also perform the zone input function Additional functionality is provided by a separate tamper TAMPER input and additional programmable I/O In addition, the expander has the ability to power a wired detector with (*3V DC*) voltage and a built-in accelerometer, whose task is to detect device sabotage

The device is designed to work with the operation of a two-way ABAX/ABAX2 wireless system
The INT-KWRL2-W keypad is designed to service and program the Integra series alarm control panels Thanks to the LCD display, which shows text messages, even the most advanced functions of the alarm control panel are easy and convenient to use
The built-in remote card counter allows you to service the system without having to remember the password
The manipulator is powered by a battery (included in the set) and communicates with the alarm center using a special radio transmission (two-way communication) protocol.

The external, controllable wireless optical-acoustic alarm is intended for use in burglary or attack signaling Two-way wireless communication at 868 MHz using Tri-X protocol and AES-128 encryption Danger is signaled in two ways: optical with a stroboscopic light and acoustically modulated with a loud sound signal (piezoelectric transducer 110 dB)
The device is powered by batteries (4 x CR123A) or voltage 12V DC
The external body of the alarm is made of impact-resistant polycarbonate, which makes it highly mechanical resistant and guarantees an aesthetic appearance even after many years of operation. The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)
DS-PS1-E-WE/RED works with other devices compatible with HIKVISION AX PRO wireless system