Fast View
Much
Art.: HMA0049
Fast View
Enough
Art.: RPS1679
Fast View
Much
Art.: RPI27771
Fast View
Enough
Art.: RPS18940
The external, controllable wireless optical-acoustic alarm is intended for use in burglary or attack signaling Two-way wireless communication at 868 MHz is based on AES-128 encryption Danger is signaled in two ways: optical with a stroboscopic light and acoustically modulated with a loud sound signal (piezoelectric transducer 110 dB)
The device is powered by batteries (4 x CR123A) or voltage 12V DC
The external body of the alarm is made of impact-resistant polycarbonate, which makes it highly mechanical resistant and guarantees an aesthetic appearance even after many years of operation. The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)
The device is powered by batteries (4 x CR123A) or voltage 12V DC
The external body of the alarm is made of impact-resistant polycarbonate, which makes it highly mechanical resistant and guarantees an aesthetic appearance even after many years of operation. The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)
Fast View
Enough
Art.: RPS18148
ACMD-200 wireless carbon monoxide sensor that detects the dangerous concentration of this gas in the monitored room The digital temperature compensation mechanism allows working in a wide temperature range The ACMD-200 can operate automatically or as a two-way ABAX2 wireless system
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Fast View
Fast View
Fast View
Enough
Art.: RPS8123
Fast View
Enough
Art.: RPI32134
Fast View
Enough
Art.: PSD16497
The housing BRACKET-E-1 is an element of the BRACKET-E modular handle of movement sensors
Fast View
Enough
Art.: RPS15116
The wireless sensor AXD-200-DG is a multi-functional device that works in a two-way wireless ABAX 2/ABAX system that meets the requirements of EN 50131 Grade 2
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
Fast View
Much
Art.: PIP18705
Fast View
Enough
Art.: PSD16528
Insert BRACKET-E-2B-GY is an element of the BRACKET-E modular handle of movement sensors The product provides the option of mounting sensors from the OPAL, OPAL Plus, OPAL Pro, AOD-210 series
Fast View
Enough
Art.: PSD15045
The HOLDER-A2 allows quick and aesthetic mounting of the wireless system controller plate in the wireless system ACU-280 inside the OPU-4-P housing. In addition to a significant improvement in installation, the product also provides an increase in the distance between the controller and the wall, which can have a positive impact on communication with the wireless device.
Fast View
Enough
Art.: PSD3553
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Fast View
Enough
Art.: RPS17459
Internal, controllable wireless acoustic alarm for use in burglary and attack systems Two-way wireless communication at 868 MHz using Tri-X protocol and AES-128 encryption The light source is an LED, and the sound signal is generated by a piezoelectric transducer
The body is made of polycarbonate to ensure user safety and resistance to high temperatures The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)
DS-PS1-I-WE/BLUE works with other devices compatible with HIKVISION AX PRO wireless system
The body is made of polycarbonate to ensure user safety and resistance to high temperatures The construction of the alarm ensures a high degree of anti-sabotage protection (against opening and tearing from the mounting base)
DS-PS1-I-WE/BLUE works with other devices compatible with HIKVISION AX PRO wireless system
Fast View
Much
Art.: LS12296
Fast View
Much
Art.: RPI30382
Fast View
Much
Art.: LS8929
Fast View
Enough
Art.: RPS6282