Much
Art.: LS10956
Enough
Art.: RPS15116
The wireless sensor AXD-200-DG is a multi-functional device that works in a two-way wireless ABAX 2/ABAX system that meets the requirements of EN 50131 Grade 2
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
Much
Art.: LS12703
Much
Art.: LS12531
Much
Art.: LS12483
Much
Art.: LS12529
Much
Art.: RPI30387
Much
Art.: RPI30374
Enough
Art.: PSD17554
The XD-2 wired sensor can work in one of 4 modes, making it an extremely versatile device Depending on the needs, the device can be configured as: a magnetic sensor, a vibration sensor, a shock sensor with a contactor, or a water inundation sensor (requires an external probe FPX-1 - available separately)
XD-2 works with any alarm center
XD-2 works with any alarm center
Enough
Art.: LS12151
Detection: Temperature, relative humidity ; Measurement range: Temperature : -40 ... 125 °C, relative humidity : 0 RH ... 100 % RH ; Frequency range: 2.4 GHz Wi-Fi - IEEE 802.11g ; Main features: Calculated parameters : absolute humidity, dew point, heat index, μWiFi technology support, remote access ;
Much
Art.: LS11849
Much
Art.: LS12649
Enough
Art.: RPS15115
The wireless sensor AXD-200-BR is a multi-functional device operating in a two-way wireless ABAX 2/ABAX system that meets the requirements of EN 50131 Grade 2
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
Much
Art.: LS11826
Much
Art.: LS11788
Enough
Art.: PSD18957
Wireless sensor ARD323-W2(868S) (hercon) is used for window and door protection
Enough
Art.: PSD16522
The base BRACKET-E-4 is an element of the BRACKET-E modular handle of motion sensors
Enough
Art.: RPS6491
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Enough
Art.: RPS6485
Microprocessor digital victim detectors DG-1-TCM are distinguished by high reliability and low current consumption The digital temperature compensation mechanism allows working in a wide temperature range
Exceeding the threshold gas concentration is signaled by optical and acoustic signals Detectors are intended for work in alarm systems It is recommended to mount the device low, close to the floor
Exceeding the threshold gas concentration is signaled by optical and acoustic signals Detectors are intended for work in alarm systems It is recommended to mount the device low, close to the floor
Much
Art.: RHM021
