Enough
Art.: PSD3553
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
A flashing LED indicates that the microphone has captured the impact sound wave If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Enough
Art.: PSD17554
The XD-2 wired sensor can work in one of 4 modes, making it an extremely versatile device Depending on the needs, the device can be configured as: a magnetic sensor, a vibration sensor, a shock sensor with a contactor, or a water inundation sensor (requires an external probe FPX-1 - available separately)
XD-2 works with any alarm center
XD-2 works with any alarm center
Much
Art.: LS12139
Enough
Art.: RPS15115
The wireless sensor AXD-200-BR is a multi-functional device operating in a two-way wireless ABAX 2/ABAX system that meets the requirements of EN 50131 Grade 2
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
The device can be operated in one of several different modes as a detector: magnetic, two-channel magnetic (with additional mode as 2x NC wire expander), magnetic with roll input (with additional mode as NC wire and roller shutter expander), shock and magnetic, displacement, temperature or flooding
Much
Art.: LS12559
Enough
Art.: RPS6491
The sensor signals danger if it detects a low-frequency signal (the sound of an impact) or a high-frequency signal (the sound of breaking glass). The low-frequency sound wave caused by the impact triggers the sensor to analyze the high-frequency channel
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Analysis of the high frequency channel takes 4 seconds If a high-frequency tone (sound of breaking glass) is detected at that time, the sensor generates an alarm
Much
Art.: RHM021
Much
Art.: HMA0285
Much
Art.: HMA0120
Much
Art.: LS10970
Enough
Art.: RPS18994
HY-SA20A high-quality installation for indoor monitoring, first-stage detection of visible smoke or fire
The smoke detector is designed for use in most homes, but is not suitable for use outside, outside the building or in high-rise buildings due to the possibility of a fire hazard not being sensed.
Attention! The device is intended for autonomous operation, it cannot work with alarm systems
The smoke detector is designed for use in most homes, but is not suitable for use outside, outside the building or in high-rise buildings due to the possibility of a fire hazard not being sensed.
Attention! The device is intended for autonomous operation, it cannot work with alarm systems
Enough
Art.: RPS18148
ACMD-200 wireless carbon monoxide sensor that detects the dangerous concentration of this gas in the monitored room The digital temperature compensation mechanism allows working in a wide temperature range The ACMD-200 can operate automatically or as a two-way ABAX2 wireless system
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Exceeding the threshold gas concentration is signaled by optical and acoustic signals It is recommended to install the device at least 1.5 ... 2.0 m above the floor
Much
Art.: PIP19279
Enough
Art.: LS11920
Much
Art.: LS12357
Much
Art.: LS12531
Much
Art.: LS11822
Much
Art.: LS12832
Enough
Art.: RPS19860
